HUBER+SUHNER – RF, Fiber, Low Frequency – Components, Cables, Connectors & Assemblies

A global end-to-end solutions partner for Active and passive DC, RF/MW, FO, and hybrid end-to-end solutions for Space, Defense, Aerospace, Automotive, Communications, Semiconductors, Rail, Data Centers, Wireless Infrastructure and more.

Featured Products

Radio Frequency Solutions (Connectors)

The PSM (Power Sub Miniature) interface meets the increasing demand for cost effective, low weight and power sensitive Aerospace applications.

View Datasheet

MBX, MBX 2nd Gen , 6GHz
MMBX, 12GHz
MFBX, 3.5GHz
SMP, SMP-SL (Self Lock), 40GHz
SMPM, SMPM-T, 67GHz
Contact Bridge
Up to 30mm

MXP 18, 40, 50 GHz
MXPM 40 to 90 GHz
MMPX 80 GHz -True Coax to PCB Transition, PC1.0 @ 110GHz

View High-Speed Digital Catalog

HUBER + SUHNER contacts are RF contacts designed for installation in MIL-DTL-38999 and similar circular/sub-D connectors.

AS12 exceptional RF performance from DC to 12.4 GHz.

AS16 –  exceptional RF performance from DC to 2 GHz. 

Radio Frequency Solutions (Components)

400MHz to 90GHz –
OmniDirectional, and Point-to-Point
Metalized Plastic, 
WiFi, SISO, MIMO 2×2, 3×3, 4×4
Low-PIM, Outdoor, Industrial, Rail, Auto
High-Power Signal Jamming

View Antenna Catalog

Fixed Attenuators

Used to reduce the power of a signal without causing distortion of its waveform. They are used in many test and measurement and communication applications.

  • 50 Ω or 75 Ω impedance
  • Fixed attenuation level from 0 dB up to 40 dB
  • Various bandwidth to improve the impedance matching between subsystems of its waveform
  • Wide range of interfaces
  • Male to female connectorisation

DC Blocks separate or block DC voltage (galvanic isolation) and let pass RF frequency along a coaxial transmission line. 

RF Filters

HUBER+SUHNER provides a portfolio of RF filters that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Our standard product portfolio comprises diplexers and multiplexers for mobile communication and transportation applications, the majority of which are ideally suited for in-building coverage solutions. Several railway-qualified products complete the portfolio. Filters are available with N and 7/16 interfaces.

Phase Shifters

HUBER+SUHNER phase shifters allow phase change while maintaining constant VSWR and insertion loss values. These passive devices have proven to be successful in aerospace, missile, and satellite programs. The construction of all phase shifters and trimming devices incorporate fine gauge threads for precise tuning. Phase shifters are terminated with precision interfaces per MIL-STD-348 including SMA, TNC, and N (in series and between series). However, custom devices can be manufactured using other interfaces.

HUBER+SUHNER low passive intermodulation (PIM) components (terminations, adapters, etc.) have an excellent PIM performance for various applications in the communication market as well as for test and measurement.

Low PIM Adapters

These low PIM adapters have been specially developed for applications in intermodulation test set-ups.

Low PIM Load

HUBER+SUHNER offers high performance intermodulation loads for test and measurement in multicarrier high RF power radio applications. They are primarily used to terminate open transmission lines in PIM sensitive applications such as an open port of a hybrid coupler. These intermodulation loads are made by using high performance material, especially selected to obtain the best PIM and VSWR results.

Low PIM Standards

HUBER+SUHNER low PIM standards are special adapters which generate intermodulation products of a certain preset level. They are used to verify intermodulation test benches for an instant and/or long-term level stability monitoring. If the third-order intermodulation value, displayed by the test instrument, deviates from the specified value of the intermod standard, it indicates a general measurement uncertainty which may be caused by the test setup rooting in one or several component or interconnection PIM sources.

Reactive Splitters

Low loss reactive splitters are used to distribute RF signals to multiple transceiver antennas or radiating cables. The RF power is evenly split to all outputs with excellent amplitude and phase balance. Only the common port is matched to 50 ohms. The broad range of reactive power splitters supports cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Reactive power splitters are available with N, 7/16 and 4.3-10 interfaces.

Wilkinson Splitters

The HUBER+SUHNER series of broadband Wilkinson type combiners/splitters is ideally suited for equally combining or dividing low power multi-carrier/multi-operator signals. Each input and output port is matched to 50 ohms. The frequency range covers 380 or 698 to 2700 MHz. The Wilkinson splitters support cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Wilkinson splitters are available with an N interface.

Resistive Power Dividers

Power dividers are designed to split a RF signal equally into two output signals with an insertion loss of 6 dB.

View the Splitter Catalog

Tappers

This series of HUBER+SUHNER tappers unevenly splits high power cellular signals in fixed ratios from 1000:1 to 2:1. It covers the entire spectrum from 350 to 5850 MHz. Tappers are widely used in multi-band/multi-operator in-building systems that cover cellular, WiFi 2.4 and 5 GHz, and TETRA security bands. Tappers are available with N and 4.3-10 interfaces.

View Tappers Catalog

HUBER+SUHNER terminators are used to close an open RF port. They are applied in a large variety of test and measurement, defense and communication applications.

Coaxial terminators
Terminators (also called RF loads or dummy loads) are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test and measurement, defense and communication applications.

Feed Through Terminators
Feed through terminations are designed to connect 50 ohm transmission lines or RF devices with high impedance test equipment, e.g. oscilloscope.

View Terminator Catalog

RF-over-Fiber Solutions

RF-over-Fiber (RFoF)

Advantages of RFoF:

  • Allows for greater distances between the RF source and the RF receiver system
  • Is immune to EMP, EMI and RFI
  • More difficult to intercept (“tap”)
  • Is lighter in weight

• Frequency range from 100 kHz to 40 GHz (110 GHz in development)
• Simplex and duplex systems
• Single-mode solution enables link distances of 100+ km
• QMA (RF) and Q-ODC-12 (FO) interfaces standard*
• Standard modules available in 1, 6, and 12 ports*

View RF-over-Fiber Catalog

GPS-over-Fiber (GPSoF)

 
 

• L1, L2, L3, L5 band coverage from 1.2-1.6 GHz

• Single-mode solution enables link distances of 100+ km

• QMA (RF) and FC (FO) interfaces standard*

• Standard modules available as a single port or 4 port receiver module*

 

Direct GPS-over-Fiber (Power-over-Fiber)

Direct GPS-over-Fiber is the world’s first 100% copper-free GNSS remote antenna eliminating the need for costly power infrastructure by Power-over-Fiber.

The Direct GPS-over-Fiber portfolio from HUBER+SUHNER is for customers in search of scalable timing infrastructure solutions for outdoor remote antenna applications that provide efficient installation, flexible configurations and no need for power infrastructure at the remote link end.

  • The world’s first 100% copper-free GPS link
  • Power is delivered to the antenna using Power-over-Fiber
  • GPS signal is distributed over optical cable
  • Efficient and scalable typologies
  • Automatic test and reboot function (ATRF)
  • NEBS Level 3 approved
  • Employs laser safety features that are compliant with all IEC standards

LAN-over-Fiber (LANoF)

• Data rate: 1000 Base-SX (10 Mbps – 1 Gbps)
• Single-mode/duplex solution enables link distances up to 20 km
• RJ45 (data) and Q-ODC-12 (FO) interfaces standard*
• Standard modules available in 1, 6, and 12 ports*

*customized configurations, bands, and interfaces available upon request!

End-to-End Fiber Solutions: Cables, Connectors, Assemblies, Components & and Optical Switching

HS RFoF End to End

Fiber Optic Solutions (Connectors/Components)

Indoor Connectors and Adapters – LC, SN, MDC, SC, E-2000, CLICK!, FC, ST, SMA, Hybrid

Multifiber Indoor Connectors and Adapters

Harsh Environment Connectors – ODC, Q-ODC, Q-XCO, FullAXS, FullAXS Mini, XCO

Active Component – ROSA, TOSA, Detectors

Multiplexer –  CWDM, DWDM, Sensor-Cubes

Passive Components –  Attenuators, Couplers, Splitters, Switch Cubes, WDM Filters

Optical Transceivers – CFP, QSFP, SFP, SFP+, XFP

Fiber Optic Solutions (Optical Switches)

 
 

Polatis 6000 128 Fibers Optical Switch

The Polatis Series 6000 Optical Switch is a high-performance, fully non-blocking all-optical matrix switch available in sizes from 4×4 up to 192×192. It is designed to meet the highest performance and reliability needs of the most demanding applications with exceptionally low optical loss, compact size, low power requirements and fast switching speeds. With support of Software-Defined Networks (SDNs) via an embedded OpenFlow and NETCONF control interfaces, the Series 6000 enables extremely low latency for time-critical traffic required for new virtual cloud services in hybrid packet-optical data centers. The Series 6000 is based on Polatis’ patented DirectLight® optical switching technology that has been proven in the most challenging data center, telecom and defense applications and is also used by major network equipment manufacturers to automate testing of optical components and subsystems.

 

Polatis Series-7000 384x384-768 Fibers Optical Switch

The Polatis Series 7000n Network Optical Switch is the largest-capacity, highest-density, highest-performance and most reliable non-blocking all-optical matrix switch available in the industry. The Series 7000n 384×384 all-optical circuit switch is designed to meet the most demanding applications with exceptionally low optical loss, compact size, and fast switching speeds. With support for Software-Defined Networks (SDNs) via embedded OpenFlow and NETCONF control interfaces, the Series 7000n can route time-critical traffic with very low-latency to enable new virtual cloud services in hybrid packet-optical data centers. The Series 7000n is the latest addition to the Polatis product line of optical switches and modules, creating the broadest portfolio available of dynamic fiber cross-connect solutions (from 4×4 to 384×384), all built on the Polatis’ patented DirectLight® optical switching platform that has been proven in the most challenging data center, telecom and defense and test applications for over a decade.

The Polatis Series 6000 family of multimode optical switches utilises the patented DirectLight beam-steering technology to deliver high performance in a compact, fully non-blocking, multimode product, in matrix sizes from 8 x 8 to 16 x 16.

The Series 6000 multimode switch is designed to meet the needs of the most demanding component, subsystem and system test applications. All-optical switching allows test equipment connections to be fully automated and controlled remotely 24/7 via software from virtually anywhere in the world.

Polatis’ patented DirectLight® beam-steering technology holds dark fibre connections so test pathways can be pre-provisioned; it is transparent to signal format and transmission speeds so there is no need to upgrade as standards evolve

Its exceptionally low optical loss, high connection repeatability and fast switching times make it ideal for optical test applications. There is no need repeatedly to make and break fibre optic connections so more accurate measurement results can be achieved.

It is now available with Polatis’ full network interface capability including SDN with NETCONF and RESTCONF control interfaces and an advanced dynamic web GUI, and features dual hot-swap power supplies for added reliability.

Lightning & EMP Protectors

Four decades of experience in developing and manufacturing coaxial lightning EMP and NEMP protectors are the foundation of the current HUBER+SUHNER RF protection portfolio.

The products are designed to meet the stringent requirements of the RF/microwave, telecommunications and wireless industry and cover civil, security and defense applications. An extensive high-voltage impulse laboratory is established to verify our designs in accordance with the valid international lightning, surge and NEMP standards.

Important inventions are covered by world – wide patents.

Four decades of experience in developing and manufacturing coaxial lightning EMP and NEMP protectors are the foundation of the current HUBER+SUHNER RF protection portfolio.

The products are designed to meet the stringent requirements of the RF/microwave, telecommunications and wireless industry and cover civil, security and defense applications. An extensive high-voltage impulse laboratory is established to verify our designs in accordance with the valid international lightning, surge and NEMP standards.

Important inventions are covered by world – wide patents.

Data Line Protectors
Quarter-wave Shorting Stub Protectors
High Voltage DC/DC Blocks
Hybrid Protectors
GDT Protectors

Application Highlights

Company Overview

HUBER+SUHNER offers customers around the globe outstanding products and services for their electrical and optical connectivity needs. We focus on the three main markets of industrial, communication and transportation which are addressed with applications from the three technologies radio frequency, fiber optics and low frequency.  

HUBER+SUHNER products deliver high performance, quality, reliability and a long service life – even under the toughest of conditions. A global production network, combined with subsidiaries and agencies in over 80 countries, puts HUBER+SUHNER close to its customers. 

Visit HUBER+SUHNER Website

SEARCH OUR WEBSITE

Can’t find what you’re looking for?

Natalie Myers

Inside Sales Administration

Natalie Myers joined Vic Myers Associates in September 2021 and is excited to be part of the team. She received her bachelor’s in business administration from the University of Phoenix and prior to her position as Inside Sales Administration she worked in the Hospitality Industry for over 15 years as a Senior Sales Administrator. In her free time, she enjoys spending time with her husband, daughter, family and friends along with watching sporting events, traveling, hiking and cheering on her daughter in dance and basketball! Natalie is located in our Arizona office.

KAREN M. ROSS

People and Culture Specialist

Cell Phone: 505-720-9123
Email: karenr@vicmyers.com

Karen has been a part of Vic Myers Associates team since February 2023. Prior to her position as People and Culture Specialist, she worked in the Science & Technology field as an HR Manager & Project Lead for SAIC and LANL. In the short time with VMA she has learned a lot and looks forward to knowing our business even better in support of all of our employees. She values her church community, her two sons who happen to be engineers, volunteering, and golf. Karen is located in our Albuquerque, NM office.

FELECIA STIVERS

Field Sales Engineer

Felecia Stivers, a native of Rockford, IL, now excels as a Field Sales Engineer at VMA in our Arizona office. Holding a BSEE from Arizona State University, she draws from her extensive background at Medtronic, Orbital Sciences, General Dynamics, and Northrop Grumman.

Specializing in high-reliability applications, Felecia stands out for her proficiency in relationship-building and innovative problem-solving. Whether contributing to medical devices or playing a vital role in rocket launches, her work has had a tangible impact on saving lives and safeguarding the nation.

Beyond her professional pursuits, Felecia enjoys time with her two teenagers, finds joy in travel, and actively engages with her local church. Driven by a passion for helping customers navigate cutting-edge technology, she is committed to delivering dependable solutions in fast-changing environments.

TAYLOR GAUNTT

Field Sales Engineer

Taylor is a Texas native, and grew up in the small town of Boerne, Texas.  He attended Texas A&M University, where earned his bachelor’s degree in Engineering.  After college he was recruited by a Manufacturer’s Rep Firm, where he spent the first 7 years of his career. Initially hired on as an inside salesperson, Taylor quickly accelerated within the organization and expanded into various other roles such as Distribution Manager, and Field Sales Engineer.  Taylor then spent the following 7 years working for an electronic component distributor named Electro Enterprises that almost exclusively supported the mil/aero market.

Taylor worked as a Field Sales Engineer supporting the Texas, Utah and New Mexico territory, Product Manager, as well as Director or Business Development where he managed a team of 10 Field Sales Professionals across the entire United States.  Gathering from his previous experiences, Taylor has now taken on the role of Field Sales Engineer with Vic Myers supporting the Texas, Oklahoma, Louisiana, and Arkansas territory.  Outside of the office you will usually find Taylor either spending time with his wife and two young children, or out on the lake bass fishing.

RICHARD MENDEZ

Sales Engineer

Richard was born and raised in Arizona. Attended Arizona State University with a focus in Mechanical Engineering and then fell into Technical Project Management. After 12 years of managing large budget projects spanning system integrations and upgrades, he transitioned into the role of Field Sales Engineer with VMA.

Richard has a deep passion for building relationships with his clients and principals, and supporting them to problem solve and develop innovative solutions. Outside of the office, Richard can be found volunteering as a mentor and coach of high school students at his church, running and hiking the extensive trails of Arizona, and spending time with his wife, 2 boys, 2 girls, and 2 grandkids. Richard is located in our Arizona office.

TARIN SCHONCHECK

Sales Administration

Cell Phone: 480-345-6449
Email: tarins@vicmyers.com

Tarin was born and raised in Wisconsin, graduated from the University of Wisconsin-Stout and received a Bachelor of Science degree in Business Administration. Prior to Vic Myers she worked in the hospitality industry 20+ years as a Sales Analyst/Administrator.

In her spare time, Tarin enjoys spending time with her family, traveling to historical sites throughout the United States, reading, going to movies and concerts. On the weekends you will find Tarin at her nephews’ band concerts and baseball games. In addition, music and dance have been a part of her life with musical contrasting influences ranging from Prince to Olivia Newton-John.  Tarin is located in our Arizona office.