Absolute EMC Specializes In EMC Testing Knowledge And Equipment. As a premier North American provider of electromagnetic compatibility expertise and test equipment, this solution delivers full end to end support for EMC and RF testing. You get consulting across IEC, MIL STD, CISPR, and automotive standards, hands on training for all major EMC and RF instruments, and complete test system design and integration. With decades of experience working alongside every major manufacturer, it also provides strategic guidance on equipment selection, emerging technologies, market trends, and procurement so you can maximize performance and ROI on every EMC investment. Suggested Products EMSCOPE-RX2 9kHz – 110MHz, 2 channel Receiver EMI Measurements: FFT-based dual-channel receiver According to CISPR16-1-1 Peak, Quasi-Peak, and Average Detectors Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL) The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements) Axos 8 – Compact 7kV Surge, Telecom, Ring Wave, 5kV EFT Multi Tester with 16AMP CDN EFT/Burst 5kV IEC 61000-4-4 Surge, Combination Wave 7kV IEC 61000-4-5 Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required) Ring Wave, 7kV IEC 61000-4-12 & ANSI Telicomm Wave, 7kV IEC 61000-4-5 & ITU AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required) DC Dips/Drops IEC 61000-4-29 (2x DC supplies required) RFScanner Antenna Pattern measurement Frequency Range of 300 MHz to 6.0 GHz Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns Near-field insights such as Amplitude and Phase distribution are available in  seconds Gain, Efficiency, and S11 chart with Supported VNAs “Real-time” real-fast Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas).  Simple set up and Easy to use REQUEST A QUOTE RefRad 18 Reference Radiator 1 GHz – 18GHz 200W 50A 160x155x200mm 2:1 ratio  200 W Maximum30Hz – 250 kHz 100 W Maximum at15 Hz – 30 Hz Insulation Resistance Test – 2kV CABAI20050 Audio Isolation Transformer 200W 50A 160x155x200mm 2:1 ratio  200 W Maximum30Hz – 250 kHz 100 W Maximum at15 Hz – 30 Hz Insulation Resistance Test – 2kV ONYX 30 30kV ESD Simulator +/- 30kV air and Contact Discharge 150pF/330Ohm Standard, Other networks available >16 hour Battery life, AC mains option Optional Software REQUEST A QUOTE FIS 100-200 Fast Interrupt Switch High current power stage (uni-directional) Up to 32 channels for switching low-current signals (bi-directional) Switching of resistive, inductive, capacitive passive, and active loads/devices Input voltage up to 100V Output current up to 200A DC CDG 7000-E Conducted Immunity Generator New test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application. 

Delivers rugged, modular, high‑performance mezzanine and board‑level systems for mission‑critical embedded computing.

Provides custom RF/microwave switches, attenuators, and modulators for radar, communications, and EW systems operating from MHz to 40 GHz.

Provides synchronized, modular DAQ systems with high-speed analog/digital input and built-in signal conditioning for structural dynamics, NVH, and aerospace test environments.

Specializes in custom-designed metal enclosures, chassis, and cabinets with EMI shielding and thermal management for rugged military and aerospace electronics.

Provides vibration and shock isolation systems, mounts, and platforms engineered to protect sensitive defense, aerospace, and industrial electronics from mechanical stress.

Builds precision linear slides and motion assemblies trusted in rugged aerospace and defense systems where failure is not an option.

Builds space-qualified RF assemblies including SSPAs, converters, and frequency generators for payload and satellite communications with high linearity and mission reliability.

Micro-Epsilon offers the largest range of high precision displacement sensors, infrared temperature sensors, color sensors as well as dimensional measurement devices and systems for industrial applications. Whether your field is research and development, manufacturing automation or machine building, we offer solutions that meet the specific requirements of your individual measurement task. Product Categories distance sensors industry sensors 3d sensors MEASURING & INSPECTION SYSTEMS Featured Products optoNCDT 1220 Laser triangulation sensor The entry-level model for precise measurements in industrial automation. optoNCDT 5500 Laser triangulation sensor NEW PRODUCT This laser sensor sets new standards in high-precision laser distance measurement. conficalDT IFD2411 Compact confocal controller The compact measuring system is a factory-calibrated measuring system for industrial series applications. thermoMETER Pyrometer infared temp measuring NEW PRODUCT The modern and powerful infrared pyrometers from Micro-Epsilon measure surface temperatures from -50 °C to +1100 °C without contact and with high precision. surfaceNCDT 3D 3500 Laser triangulation sensor The high-precision surfaceCONTROL 3D 3500 snapshot sensor is used for the automated optical inspection of geometry, shape and surfaces on diffuse reflective surfaces. interferoMETER 5200-TH Laser triangulation sensor NEW PRODUCT The new IMS5200-TH white light interferometer opens up new possibilities for fast and reliable thickness measurements. REQUEST A QUOTE optoNCDT 1220 Laser triangulation sensors Optimized for OEM and series use: Measuring ranges (mm): 10 | 25 | 50 | 100 | 200 | 500 Linearity from 10 µm Repeatability from 3.7 µm Measuring rate 2 kHz Compact size with integrated controller 2 m integrated sensor cable with open ends Trigger input & Analog output Fast commissioning and ease of use Robust aluminum housing with IP67 optoNCDT 5500 Laser triangulation sensors NEW PRODUCT High-performance laser sensor for high-end applications: Measuring ranges (mm): 10 | 25 | 100 | 200 Linearity from 1.5 µm Repeatability from 0.15 µm Adjustable measuring rate up to 75 kHz Compact sensor design with integrated controller Outputs: Ethernet, RS422, analog output, switching outputs High-speed adaptation to changing surfaces optoNCDT BL Laser triangulation sensors Blue Laser sensor for metals and organic materials: Measuring range 2 mm Linearity 0.6 µm Resolution 30 nm Adjustable measuring rate up to 49 kHz Integrated controller In/Out: RS422, Ethernet, EtherCAT, Profinet, EtherNet/IP Analog output via C-Box/2A Fast adaption to rapidly changing surface types using Advanced RTSC optoNCDT 1220 Confocal chromatic sensors Optimized for OEM and series use: Measuring ranges (mm): 10 | 25 | 50 | 100 | 200 | 500 Linearity from 10 µm Repeatability from 3.7 µm Measuring rate 2 kHz Compact size with integrated controller 2 m integrated sensor cable with open ends Trigger input & Analog output Fast commissioning and ease of use Robust aluminum housing with IP67 optoNCDT 5500 Confocal chromatic sensors NEW PRODUCT High-performance laser sensor for high-end applications: Measuring ranges (mm): 10 | 25 | 100 | 200 Linearity from 1.5 µm Repeatability from 0.15 µm Adjustable measuring rate up to 75 kHz Compact sensor design with integrated controller Outputs: Ethernet, RS422, analog output, switching outputs High-speed adaptation to changing surfaces optoNCDT BL Confocal chromatic sensors Blue

Designs RF and microwave components including filters, switches, and converters with MIL-STD performance for use in SIGINT, SATCOM, and electronic warfare systems.