Absolute EMC Specializes In EMC Testing Knowledge And Equipment.
Suggested Products
EMSCOPE-RX2
9kHz - 110MHz, 2 channel Receiver
EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)
Axos 8 - Compact
7kV Surge, Telecom, Ring Wave, 5kV EFT
- Multi Tester with 16AMP CDN
- EFT/Burst 5kV IEC 61000-4-4
- Surge, Combination Wave 7kV IEC 61000-4-5
- Surge Magnetic field IEC 61000-4-9 (MSURGE-A loop antenna required)
- Ring Wave, 7kV IEC 61000-4-12 & ANSI
- Telicomm Wave, 7kV IEC 61000-4-5 & ITU
- AC Dips/Drops IEC 61000-4-11 (DIP 116 dips transformer required)
- DC Dips/Drops IEC 61000-4-29 (2x DC supplies required)
RFScanner
Antenna Pattern measurement
- Frequency Range of 300 MHz to 6.0 GHz
- Far-Field Patterns and Bisections, including EIRP / TRP / PRD, Circular and linear polarization, and axial ratio patterns
- Near-field insights such as Amplitude and Phase distribution are available in seconds
- Gain, Efficiency, and S11 chart with Supported VNAs
- “Real-time” real-fast
- Can be used to evaluate either standalone (i.e. passive) antennas or antennas that are embedded in wireless devices (i.e. active antennas).
- Simple set up and Easy to use
RefRad 18
Reference Radiator 1 GHz - 18GHz
- 200W
- 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz – 250 kHz
- 100 W Maximum at15 Hz – 30 Hz
- Insulation Resistance Test – 2kV
CABAI20050
Audio Isolation Transformer
- 200W
- 50A
- 160x155x200mm
- 2:1 ratio
- 200 W Maximum30Hz – 250 kHz
- 100 W Maximum at15 Hz – 30 Hz
- Insulation Resistance Test – 2kV
ONYX 30
30kV ESD Simulator
- +/- 30kV air and Contact Discharge
- 150pF/330Ohm Standard, Other networks available
- >16 hour Battery life, AC mains option
- Optional Software
FIS 100-200
Fast Interrupt Switch
- High current power stage (uni-directional)
- Up to 32 channels for switching low-current signals (bi-directional)
- Switching of resistive, inductive, capacitive passive, and active loads/devices
- Input voltage up to 100V
- Output current up to 200A DC
CDG 7000-E
Conducted Immunity Generator
New test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. Use an external Amplifier you already have or one that matches your application.
PEFT 8010
EFT/Burst Test System
- EFT/Burst
- Up to 7.3kV (6.6kV at CDN)
- CDN: 264V-AC 16-440Hz, 125V-DC
- CDN: 16A-AC @ 50-60Hz, 10A-AC @ 400Hz, 16A-DC
TEST STANDARDS: ANSI/IEEE C62.41, IEC/EN 61000-4-11, IEC/EN 61000-4-12, IEC/EN 61000-4-29, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-9, IEC/EN 61000-6-1, IEC/EN 61000-6-2
PG1275F - MIL-STD-1275F
Surge/Spike Test Generator
MIL-STD-1275F Compliant: Dedicated design for conducted susceptibility testing on 28 VDC circuits.
Spike & Surge Testing: Handles spikes up to 250 V / 250 mJ and surges up to 100 V / 1210 J.
High Current Capability: 16 A continuous or up to 400 A with the optional DM400 decoupling diode module.
Adjustable Waveforms:
Configurable rise times, pulse durations, and voltages for precise test conditions.
User-Friendly Control: Remote interface via RS232 or USB, with optional control software for automated testing.
POG-CS116-CS115
Test Generator
MIL-STD 461 CS115+CS116 Compliant:
Meets stringent military testing standards.
Flexible Frequency Options: Choose from 6, 9, or 17 test frequencies.
Comprehensive Accessories: Includes injection probe, attenuator, oscilloscope, and control software.
Efficient Operation: Single signal output reduces test time and supports automation.
User-Friendly Control: Easily controlled via RS232 and USB interfaces.
Robust Design: Durable construction with wide power compatibility (90–264 Vac).
PG-CS115 - CS115
Test Generator
MIL-STD 461 Compliant: Meets stringent military standards for reliable testing.
Flexible Configurations: Available as standalone (PG-CS115) or modular (M-CS115) units.
Comprehensive Accessories: Optional injection probe, attenuator, oscilloscope, and control software.
High Precision: Delivers accurate rectangular pulses with rapid rise/fall times (≤ 2 ns).
Versatile Testing: Supports single and repetitive pulse rates from 1 to 50 Hz.
Compact Design: Lightweight and portable, ideal for various testing environments.
Reliable Performance: Durable construction ensures long-term use in demanding settings.
