Specifying a computer for any task can seem like a difficult assignment. With all of the decisions about components, form factor and the like, it’s easy to feel overwhelmed. For a comprehensive checklist, please see the Attached White Paper.
Alta Releases PCI ExpressCard 54mm – One and Dual Channel 1553 Card Leads Industry Innovation
By rongarcia, Posted at April 1st, 2010 at 17:07
ALTA DATA TECHNOLOGIES RELEASES MIL-STD-1553 54mm PCI EXPRESSCARD
New MIL-STD-1553 One and Dual Channel Card Leads Industry Innovation
Rio Rancho, NM (March 18, 2010) – Alta Data Technologies (Alta) announces the release of a MIL-STD-1553 54mm PCI ExpressCard (ECD54-1553) interface card that can support one or two dual redundant MIL-STD-1553 channels (networks). The ECD54-1553 card provide many industry-first features, including a rugged thumbscrew, low profile connector, an A/D signal capture and full 1553 signal generator. The PCI ExpressCard 1553 supports Windows™, Linux, RTOS and LabVIEW™ and is the only PCI ExpressCard products that can run and execute the SAE AS4111 5.2 RT Validation tests, can operate as full Bus Controller (BC), multi Remote Terminal (mRT) and Bus Monitor, and provide advanced Signal Capture. Click here to read more…
Advanced Modular Calibration System
By rongarcia, Posted at July 8th, 2009 at 11:00
New from GE Sensing
Advanced Modular Calibration System Modularity brings a whole new perspective to multi-function test instruments and calibrators.
The Advanced Modular Calibration System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments.
At the heart of this system is the DPI 620, an ultra-compact electrical, temperature and frequency calibrator, which provides simultaneous measurement and source capabilities. It integrates with pressure modules and pressure generation stations to form uniquely capable pressure test and calibration systems.
Product Description
The Advanced Modular Calibration System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments:
- Its basic component is an ultra-compact, electrical, frequency and temperature calibrator, which provides simultaneous measurement and source capabilities.
- Pressure measurement is provided by interchangeable pressure modules that can be attached to the calibrator by a pressure module carrier.
- If pressure generation is required the calibrator and pressure module can be attached to one of three pressure generation stations, to form a fully-integrated pressure calibrator, of unparalleled performance.
Suitable for
- Plant and process engineers
- Service companies and site contractors
- Installation and commissioning engineers
- Laboratory technicians
Service Types
- Calibration
- In-House
- On-Site
- Repair
- In-House
- On-Site
- Evaluation
System features
- Modular concept provides greater flexibility
- Re-range during use
- Expand over time
- Adapt by application
- Allows significant inventory reductions
- Simplifies user training
- Reduces cost of ownership
Multifunction calibrator
- Accuracy from 0.0025%rdg + 0.002%FS
- Measure, source and simulate mA, mV, V, ohms, frequency, RTDs and thermocouples
- HART communication
- Easy-to-use, with video quality touch screen
- Hand held PC version with Windows CE
- USB and WiFi IEEE 802.11g connectivity
Pressure measurement
- 25 mbar to 1000 bar/10 inH2O to 15000 psi
- Accuracy from 0.005%FS
- Fully interchangeable modules with no need for set-up, calibration or tools
Pressure generation
- Advanced pressure generation
- - 95% vacuum to 20 bar pneumatic
- - 95% vacuum to 100 bar pneumatic
- - 0 to 1000 bar hydraulic
- Stand-alone pressure stations can replace hand pumps and can be used as comparators
Applications
- Instrumentation installation, commissioning, maintenance and calibration
- System measurement and monitoring
- Indicator, recorder and controller testing
- Process loop set up and diagnostics
- Switch, trip and safety system testing
VicMyers.com Gets a New Look!
By rongarcia, Posted at July 7th, 2009 at 21:04
We just launched our new website! Our intent is to provide dynamic content like What’s New, Industry News, Featured Products as well as technical articles along with product information and links to the manufacturers that we represent. Take a look around and feel free to let us know what you think.